Adjustable Drop Hitch for a Trailer 3000KG
Like hayman reese and European towbars, the holes allow easier and better levelling. Their ball mounts are adjustable to match different positions and heights of your application.
- MAXIMUM G.T.W (GROSS TRAILER WEIGHT) = UP TO 7000LBS (3000kg) AND BALL LOAD = 650LBS (250kg)
- MAX. DROP = 232MM (SHOWN IN THE LAST PICTURE & MEASURED FROM TOP OF SHANK TO TOP OF BALL PLATFORM)
- MAX. RISE = 200MM
- LENGTH (HITCH HOLE TO BALL HOLE) = 305MM
- DISTANCE BETWEEN HOLE CENTRES ON UPRIGHT = 37.5MM
- End of the shank to the centre of hitch pin hole = approx 70mm
- End of the shank to start of vertical adjustment bar = approx 225mm
- End of the shank to start of weld on support gusset = approx 145mm
Ball mounts connect your tow vehicle's hitch with the coupler on your trailer. The ball mount slides into the hitch's opening to connect to the tow vehicle and is held in place with a pin and clip. The ball mount has a platform with a hole in it where a hitch ball is attached.
How to choose the correct ball mount
Determine how much weight capacity your ball mount should have
Make sure your ball mount fits your receiver and your trailer coupler.
Determine the rise or drop needed to tow your trailer level
Decide whether you want these other features in your ball mount:
Adjustable ball mounts fit trailers of different coupler heights and sizes.
Aluminium vs steel construction
Locks and locking ball mounts
Other special features
Features
The adjustable ball mount offers different positions to match the height of your application.
Tow trailers of varying heights with the same vehicle
The channel-style mounting system is easy to adjust.
Move ball mount up or down along channel.
Corrosion-resistant black powder coat finish.
COMPLIES WITH SAE J684/V-5 STANDARDS
Suit: MOST 2" SQUARE RECEIVERS
Specifications:
- With a 50mm diameter ball (fits any 2" receiver)
- With a 15mm pin
- Reversible (ball can be fit on top or underneath)
- Hitch: 300mm long
- The width of the tongue is 65mm
- The length of the square tube: 150mm
- The pinhole to tow ball hole is 195mm
- Powder-coated finish & steel ball
- Complies with ISO 9001 Standard
In the Box
1 X ADJUSTABLE TOWBAR WITH 2" DROP
1 X 50MM TOW BALL
1 X HITCH PIN LOCK
1 X BALL COVER
2 X BOLTS AND NUTS
2 X SECURITY KEYS
